EV Charger Installation for Leichhardt Homes

Charging overnight from a regular power point and still not topped up by morning.

A garage without a dedicated circuit. We install EV chargers sized properly to your home's supply.

Call (02) 9538 7139 for a quote.

Fast ResponseOften same or next day for EV charger quotes and bookings.
AS/NZS 3000 CompliantEvery install wired and tested to the wiring rules.
Name-Brand SwitchgearClipsal and Hager, built to carry an EV charging load properly.
Certificate of Compliance IncludedLodged once testing confirms the circuit's sound.

What We Handle Under EV Charger Installation

An EV charger install goes well beyond bolting a box to the garage wall.

Dedicated circuit installation. Sized correctly for your charger and switchboard capacity.

Switchboard capacity check. Confirming your board can take the extra draw before anything's connected.

Charger mounting and wiring. Positioned for easy daily use, wired back to a dedicated circuit.

Load management setup. Balancing the charger against the rest of the home's demand where needed.

Testing and certification. Every circuit tested and signed off before you plug in.

Call (02) 9538 7139
Electrician testing circuits in a switchboard with a multimeter

Signs You Need EV Charger Installation

A few situations make a dedicated charger worth booking.

  • An overnight charge from a regular outlet that's still short of full by morning
  • An extension cord run out to the driveway or garage as a workaround
  • A new EV on order with nowhere proper to charge it at home
  • A shared driveway or carport where charging needs to be managed carefully
  • Circuits already tripping when the car charges alongside other appliances

If charging is starting to feel like a daily inconvenience rather than something that just happens overnight, get the circuit assessed before it becomes a bigger frustration.

A dedicated circuit also charges faster than a standard outlet ever will, which matters if the car is your daily driver.

Call (02) 9538 7139
Electrician working on the wiring inside a switchboard

The Leichhardt Angle on EV Charger Installation

Leichhardt's housing mix runs from freestanding terraces to a growing number of units and apartments, and that split shapes how an EV install actually plays out.

A terrace with its own driveway or garage is usually a straightforward dedicated circuit, run back to a switchboard we can access freely.

Older terraces sometimes carry a switchboard that was never built with today's appliance count in mind, which is worth checking before a charger is ordered.

Apartments and unit blocks are a different proposition, since shared switchboards and car park wiring mean strata approval comes before any install can proceed.

Near MarketPlace Leichhardt, the mix of older houses converted to units alongside standalone homes means we're often quoting both scenarios in the same week.

Buyers moving into the area are increasingly asking about EV readiness before they even settle in, so we're seeing more installs booked in the first few months of ownership.

Electrician installing a wall power point

The Factors Behind a EV Charger Installation Quote

A handful of things shape what an EV charger quote comes to.

  • How far the cable has to travel to reach the mounting spot
  • Whether the existing switchboard has spare capacity or needs upgrading
  • Charger type and its maximum charging rate
  • Cable run complexity, including any wall or slab penetrations
  • Apartment or strata approval requirements where they apply

Quotes are free, written and fixed before booking, and new customers take $50 off the invoice.

Call (02) 9538 7139
Electrician testing circuits in a switchboard with a multimeter

How the Job Runs and How Long It Takes

1. Site assessment. We check your switchboard, charger location and cable run.

2. Written quote. One number, agreed before the install begins.

3. Circuit installed. Dedicated wiring run and the charger mounted and connected.

4. Tested and certified. The circuit tested before you charge, with compliance paperwork to follow.

A single charger on an existing driveway is usually wrapped by lunchtime. Find a switchboard that needs upgrading first and the job stretches out, something we flag at the quote rather than mid-install.

Electrician working on the wiring inside a switchboard

What NSW Requires for EV Charger Installation

EV charger circuits are notifiable electrical work in NSW, so a compliance certificate gets lodged once the install passes testing.

The dedicated circuit gets sized, protected and run to AS/NZS 3000, the wiring standard that governs the job.

A safety switch (RCD) covers the new circuit as standard, on top of whatever protection the rest of the switchboard already carries.

That protection matters more with an EV charger than most circuits, given how many hours it runs unattended overnight.

For apartments, body corporate rules sit alongside the electrical requirements, and both need to be satisfied before the charger goes in.

Getting strata sign-off early avoids a finished install stalling on paperwork that should have started weeks earlier. We can put together the technical detail strata usually asks for as part of the quote.

Call (02) 9538 7139
Electrician installing a wall power point

What You Get When We Do Your EV Charger Installation

You get a circuit sized properly for your charger, not a generic install that ignores what your switchboard can actually carry.

Name-brand switchgear goes into every job, chosen for reliability under a daily charging load rather than the cheapest option on the shelf.

Fast response means quotes often turn around same or next day, so an EV on order doesn't sit waiting on a charger booking.

That workmanship is covered for good under our guarantee, regardless of how the switchboard behind it looks.

We'll also walk you through charging speeds and cable types before you buy, so the unit you choose actually suits how you drive.

Electrician testing circuits in a switchboard with a multimeter

Servicing Leichhardt and the Suburbs Around It

We install EV chargers across Leichhardt and out to Annandale, Balmain and Haberfield, covering the same mix of terraces and units on each side of the boundary.

Where a switchboard can't yet carry the extra load, upgrading it first clears the way for the charger to go in properly.

We've fitted chargers on both sides of Norton Street, from freestanding houses with their own driveway to units sharing a basement car park.

Call (02) 9538 7139
Electrician working on the wiring inside a switchboard

Common questions

Common EV Charger Installation FAQs

Is a permit or notification needed for EV charger installation in NSW?

Yes, it's notifiable electrical work, so it gets certified and reported once the install is done.

Can EV charger installation be done without turning off power all day?

Usually. The power's off for a short window while we connect the circuit, not the whole day.

How long does EV charger installation take?

Most single installs are done in half a day, longer if the switchboard needs upgrading first.

How do I prepare for the job?

Just clear access to the switchboard and wherever you want the charger mounted. We'll handle the rest.

What are the signs I need EV charger installation?

Charging from a standard power point overnight and still not reaching full charge is the main one we hear.

Do you handle strata or apartment EV charger installation in Leichhardt?

Yes, though apartment installs usually need strata sign-off first, and shared switchboard capacity often shapes what's possible.

Call Now and Get It Sorted

An EV charging off an extension cord isn't a long-term fix.

Call (02) 9538 7139 and we'll get a dedicated circuit sorted properly.

Call Now